Voltage on Speed Dial
This unit combines an 88.8Wh lithium battery pack with a 12V jump output through an included clamp set. The selectable peak-current variants indicate the maximum short-duration output rating for jump use. A front LCD reports charge level and operating status for the jump and charging functions. The enclosure is rated IP64 for dust and water spray exposure.
Power Path, No Guesswork
For vehicle starting support, the clamp lead connects to a 12V battery using positive and negative terminal contact, then the jump output is enabled from the control interface. For accessory charging, the pack provides a 65W USB-C PD port (input/output) and a QC3.0 USB-A output for electronics. Operating temperature is listed at -4 to 140°F (-20 to 60°C). An integrated LED light includes steady illumination plus strobe and SOS modes.
Clamp, Charge, Stow
Charge the unit through the USB-C PD port using a 65W-capable charger and cable, then store the clamps and lead with the pack to keep connectors separated. During use, connect the clamp set to the vehicle battery terminals and confirm the status indicators on the LCD before enabling output. After use, disconnect the clamp lead from the battery, coil the cable, and return it to the case or vehicle storage area. Clean the exterior with a dry cloth; keep ports closed when not in use to maintain the IP64 rating.
Product Benefits:
-
12V Battery Terminal Connection: Clamp lead attaches to positive and negative terminals on standard 12V vehicle batteries.
-
Selectable Peak-Current Variant: Variant rating indicates the maximum short-duration jump output (3000A or 4000A).
-
LCD Status Display: Front LCD shows battery level and basic jump/charging status indicators.
-
USB-C PD Port (65W in/out): USB-C port supports charging the pack and powering compatible devices up to 65W.
- IP64 Enclosure Rating: Housing is rated for dust exposure and water spray when ports are closed.
Specification:
-
Material: Polymer housing
-
Dimensions: 9.33 × 3.86 × 1.50 in
-
Power Source or Voltage: Internal lithium battery pack; 12V jump output
-
Operating Range or Capacity: Battery capacity 88.8Wh; operating temp -4 to 140°F; peak current 3000A or 4000A (depends on variant)
-
Connection Type: Smart jumper clamp lead for 12V battery terminals; USB-C PD (65W in/out); USB-A QC3.0 output
- Placement or Use Area: Interior cabin, trunk, cargo area
